| # | Summary | Link | Date |
1. | As a one-time solution for the project ‘29338 Dominion Square West - South Side', non-standard steel L angle 40x72x3mm (AZP000000247) was specified to be supplied in full length, and this information was included in the shop drawings. | OTS #31 | 7/26/2024 |
2. | As a one-time solution for the project ‘22862 Student Residence Hall at Saint Joseph's University', non-standard bent aluminum L angle 60x40x3mm and PVC profile 3254 were approved, profiles were cut on-site. | 4/11/2024 | |
3. | As a one-time solution for the project ‘22700 Tucson Hub V,' steel L angle 40x40x3mm with holes on both sides were approved and implemented. | 1/17/2024 | |
4. | As a one-time solution for the project ‘21542 117 Union Street,' non standard exterior trim was implemented. The drawing ID-0000028-84 were provided, along with screws (AZF000000280), rivets (AZA000000065), and their assembly instructions. | 1/2/2024 | |
5. | As a one-time solution for the project ‘23689 Park Plaza,' non standard Aluminum flange 50x25x2mm for the AC Unit, with holes only on the long leg side, has been requested by the client, and a new one-time solution component (AZP000000699) has been entered into the system. | 12/19/2024 | |
6. | As a one-time solution for the project ‘18166 Phase 2- Jackson Place,' non-standard steel L angle 40x72x3mm (AZP000000247) was specified to be supplied in full length, and this information was included in the shop drawings. | 2/6/2025 | |
7. | As a one-time solution for the project ‘18220 NJ P.A.C. L&M Midrise, Newark, NJ (Performing Arts Center),' non-standard splay panels have been used and rules for drafters ID-0000028-128 has been prepared. | 2/7/2025 | |
8. | As a one-time solution for the project ‘133135 303 DX080 - NJPAC,' non-standard steel L-angle 50x40x3mm (AZP000000704) has been approved. | 3/13/2025 |