Corner Mullions

Corner Mullions

#
Summary
Link
Date
1.
As a one-time solution for the project ‘23636 280 8th Avenue', drawings for Corner mullion 2304 + frame 8001 has been updated, including a version without widening, new screw hole placements, and added dimensions.OTS #28
7/8/2024
 2.
As a one-time solution for the project ‘18224 Cooper Park Commons B2 - Maspeth Ave’, the standard 90° corner mullion was adapted for use at 94° and 86° angles. Custom production and installation drawings (ID-0000028-156-1 and ID-0000028-156-2) have been created.
 6/4/2025
 3. 
 As a one-time solution for the project  P26434 Hub Madison - Johnson & Broom, the drawing ID-0000028-188.V1 has been created for corner undersill gap issues. The solution addresses the incorrect corner mullion extension.
 1/13/2026
 4. 
 As a one-time solution for the project P27938 Coney Landing – 2955 W 28th St, project-specific installation and production rules were prepared for the angle mullion at the knee wall. Drawing ID-0000028-212 defines the required production modifications and provides instructions for the correct on-site installation and sealing for position SF-2e, 2d, 2c.2 S7/S6. One undersill is to be supplied with the project, and the required bracket and screws must be included. CANCELLED
 7/9/2026
 5.
 As a one-time solution for the project P27938 Coney Landing – 2955 W 28th St,  solution was prepared for the extended EZ mullion and widening at the knee wall. Drawing ID-0000028-213 defines the required length rules and production modifications for position SF-2e, 2d, 2c.2 S7/S6. Installation and sealing remain standard.
 7/17/2026




    • Related Articles

    • Connecting Mullions

      # Summary Link Date 1. As one-time solution for the project ‘10-14 South Street, Jersey City' it was allowed to use pre-cut EZ mullion reinforcements in order to solve the issue with clearance. OTS #8 9/6/2024 2. As a one-time solution for the ...

    • Integral Mullions

      # Summary Link Date 1. As a one-time solution for the project P20796 Winchester Green, rules for 34 mm stuck-on grids have been defined for Position D03 R using the AZP000000259 decorative grid. The new drawing, ID-0000028-191, includes the grid ...

    • Receptors

      # Summary Link Date 1. As a one-time solution for the project '21576 Hub on Campus - Raleigh' receptors with pre-installed end plates were allowed, and installation instructions for production have been prepared. OTS #10 9/24/2024 2. As a one-time ...

    • Add-on

      # Summary Link Date 1. As a one-time solution for the project ‘23596 Park Lane (Dallas, TX),’ add-on mullions around all windows where EZ-mullion is used on the interior side were approved, and cutting instruction ID-0000028-123 has been prepared. ...

    • Additional Profiles

      # Summary Link Date 1. As a one-time solution for the project ‘29338 Dominion Square West - South Side', non-standard steel L angle 40x72x3mm (AZP000000247) was specified to be supplied in full length, and this information was included in the shop ...